Frames With Round Post Supports
RoofScreen SC3R Frame
(Cantilevered Three Member Frame With Round Post Supports)The SC3R frame consists of 3 round galvanized tube members, stainless steel connector fittings and our Round Post Support system which allows adjustment for roof slope and a watertight connection. This system is highly adjustable during installation and does not require perfect alignment of the front Base Supports from frame to frame.
SC3R frames are designed to be used as the primary structural supports for equipment screens on flat and low sloped commercial rooftops. The frames can accommodate virtually any type of face panels or materials to achieve the desired aesthetics for the building. The Round Post Support system can attach in a watertight manner to any type of roof construction, occasionally needing additional structural blocking or reinforcement.
RoofScreen NC2R Frame
(Two Member Frame With Round Post Supports)The NC2R is a light-duty frame consisting of two round galvanized tube members, stainless steel connector fittings and our Round Post Support system which allows adjustment for roof slope and a watertight connection.
With this configuration, the vertical tube is connected directly to the front Base Support, eliminating front-to-back adjustability of the screen face. This means the Base Supports must be installed in a perfect line to have a straight screen.
Round Post Support
Frames mounted with our Round Post Supports are our most economical option, but have certain limitations. The Round Posts are adjustable to account for insulation thickness and are easily waterproofed with a standard pipe flashing using the caulk-and-band method. However, this frame type does not reduce the moment loads (torque) at the connection points. This means the roof deck and structure below must be strong enough to overcome those loads (e.g. concrete, wide flange beams, etc.).
Specs 
